CALL TODAY AND SAVE 15% ON REPAIR!
CALL TODAY AND SAVE 15% ON REPAIR!
Microwaves are appliances that we don’t always think about needing repairs. We use them for short bursts of time, then forget about them again. However, repairing a microwave means you don’t have to buy a completely new one, which can be more expensive.
If you live in Nassau County or the greater Levittown, NY area and need microwave repair, be sure to contact us. We can have your appliance running in no time!
Signs Your Microwave Needs To Be Fixed
Microwaves are convenient and easy to use. They make it simple to eat a meal and take steps out of recipes. Overall, we rely on microwaves a lot more than you might realize. You will want to make sure it doesn’t break since it can be very inconvenient to not have them around.
Does your microwave need appliance repair in Nassau County? If it does, we are here to help! All Island Appliance Repair is full of professionals who have fixed plenty of kitchen appliances in the past. All Island Appliance Repair is well known in the Levittown, NY area since we always provide amazing work.
Be sure to keep an eye on your appliance next time you use it. If you notice any of the following signs, make sure to contact us for microwave repair Levittown, NY right away.
Your microwave shouldn’t be loud. If it sounds noisier than usual, you will want to have it fixed. It’s even more essential if the microwave starts getting louder each time you use it. This sign means that a piece in the appliance is not functioning right. If you let it go, it is only going to get worse.
The machine also should not be rattling or making clinking noises. These sounds mean some piece of hardware is out of line. We can determine what part is loose and repair it for you. This repair is simple and will not take us long at all to complete.
The Door Handle is Broken
The handle can break easily since we tend to force the door open. If this happens, the sensor will not know when the door is closed. That leads to the microwave not starting since it thinks the door is still open. You can do this microwave repair job on your own if you are comfortable with it. You will only be taking apart the door.
However, if you don’t want to handle that project on your own, we are here for you. Our technician can take care of all the steps in making the repair. We are confident we can give you a quality, lasting result.
It Won’t Turn On
If your microwave won’t turn on, there could be several different things that are wrong with it. There could be issues with the control panel, the circuit, or the door could be broken. For a simple appliance repair, our technician will handle everything for you.
The Turntable is Stuck
The biggest issue we get calls for is that the turntable is not moving. If it’s not spinning, certain areas of your food are going to heat faster than others. There are several different issues that could cause a need for microwave repair. The main parts responsible for the turntable are the drive motor, the coupler, the plate, and roller guides. If one part goes wrong, the entire turntable can become stuck.
There’s No Heat
Finally, is there heat in your microwave or is your food coming out still cold? This issue likely means that you need a new microwave. However, we would still like to look at your appliance. There is a chance that it can still be fixed and we are sure to find it.
There’s a Burning Smell
If you often smell something burning from the microwave, but your food seems fine, there may be a flaw in the microwave. Take some time to thoroughly clean the machine. If you still notice the burning smell, have us come take a look. We deal with this issue all the time in Nassau County, so we know we can fix your appliance too.
Why Call Us
Many people are reliant on their microwaves, even if they do not realize it. We can provide the needed appliance repair services to ensure your microwave is running smoothly again. Plus, many microwave brands use similar parts. We can easily source a part from you and install it.
Overall, All Island Appliance Repair is here to help you with your microwave problems. Make sure to call us today at 347-488-8065.
Levittown is a hamlet and census-designated place (CDP) in the Town of Hempstead in Nassau County, on Long Island, in New York, United States. It is located halfway between the villages of Hempstead and Farmingdale. As of the 2010 census, the CDP had a total population of 51,881, making it the most populated CDP in Nassau County and the second most populated CDP on Long Island, behind only Brentwood.
The building firm, Levitt & Sons, headed by Abraham Levitt and his two sons, William and Alfred, built four planned communities called ‘Levittown’, in New York, Pennsylvania, New Jersey, and Puerto Rico; the Levittown in New York was the first. Additionally, Levitt & Sons’ designs are featured prominently in the older portion of Buffalo Grove, Illinois; Vernon Hills, Illinois; Willingboro Township, New Jersey; the Belair section of Bowie, Maryland; and the Greenbriar section of Fairfax, Virginia.
The Levitt firm began before World War II, as a builder of custom homes in upper middle-class communities on Long Island. During the war, however, the home building industry languished under a general embargo on private use of scarce raw materials. William ‘Bill’ Levitt served in the Navy in the Seabees – the service’s construction battalions – and developed expertise in the mass-produced building of military housing using uniform and interchangeable parts. He was insistent that a postwar building boom would require similar mass-produced housing, and was able to purchase options on large swaths of onion and potato fields in undeveloped sections of Long Island.
Returning to the firm after war’s end, Bill Levitt persuaded his father and brother to embrace the utilitarian system of construction he had learned in the Navy. With his brother, Alfred, who was an architect, he designed a small one-floor house with an unfinished ‘expansion attic’ that could be rapidly constructed and as rapidly rented to returning GIs and their young families. Levitt & Sons built the community with an eye towards speed, efficiency, and cost-effective construction; these methods led to a production rate of 30 houses a day by July 1948.They used pre-cut lumber and nails shipped from their own factories in Blue Lake, California, and built on concrete slabs, as they had done in a previous planned community in Norfolk, Virginia. This necessitated negotiating a change in the building code, which prior to the building of this community, did not permit concrete slabs. Given the urgent need for housing in the region, the town agreed. Levitt & Sons also controversially utilized non-union contractors in the project, a move which provoked picket lines. On the other hand, they paid their workers very well and offered all kinds of incentives that allowed them to earn extra money, so that they often could earn twice as much a week as elsewhere. The company also cut out middlemen and purchased many items, including lumber and televisions, directly from manufacturers. The building of every house was reduced to 26 steps, with sub-contractors responsible for each step. His mass production of thousands of houses at virtually the same time allowed Levitt to sell them, with kitchens fully stocked with modern appliances, and a television in the living room, for as little as $8,000 each (equal to $92,721 today), which, with the G.I. Bill and federal housing subsidies, reduced the up-front cost of a house to many buyers to around $400 (equal to $4,636 today).
Here are some repairs-related links: